External Systems

Add another dimension to an architectural façade with the incorporation of Screenwood external timber panels. They are ideal for façade lining, soffits, fencing and screening.

TransparentBox
Architect/Specifier: Kerry Hill Architects | Photo: Francis Andrijich Photographer </br> Product Installed: 3040-6 Hemlock, clear coatingArchitect/Specifier: OFTB </br> Product Installed: 3040 Western Red Cedar, teak coatingArchitect/Specifier: BYA Architects </br> Product Installed: 6030 Western Red Cedar, clear preservative coatingArchitect/Specifier: BYA Architects </br> Product Installed: 6030 Western Red Cedar, clear preservative coatingArchitect/Specifier: Christou Design Group </br> Product Installed: 3040 Western Red Cedar, 1/2 walnut coatingArchitect/Specifier: Kerry Hill Architects </br> Product Installed: Custom, clear coatingArchitect/Specifier: Corben Architecture </br> Product Installed: 3040-6 Western Red Cedar, grey oil coatingArchitect/Specifier: Nicholas Murray Architect </br> Product Installed: 4020 Spotted Gum, clear coating

Screenwood External Systems

Screenwood External Systems are modular linear timber panels available in a number of standard and custom profiles and species. Manufactured from solid timber slats in a variety of sizes and spacings to allow for architectural elements such as entries and windows.

Panel Sizes

  • Screenwood External Panels are delivered to site pre-finished in modules 296mm wide and in lengths from 100mm–3600mm.

  • Panels can be cut to specified lengths and corner and edge trims delivered ready for installation as required
  • For panel lengths longer than 3600mm, Screenwood recommends dividing in two or more bays of panels with an expressed gap of 10mm. Screenwood recommends avoiding butt joints.