Screenwood Ceiling Panels can be used within a coffer or suspended below the existing ceiling level. Screenwood’s concealed bracketing system (patent pending) is screwed to the ceiling substrate or suspended ceiling system creating a floating ceiling effect without exposed fixings. For floating ceilings, the acoustic lining can be omitted.
Screenwood Ceiling Tiles come in standard sizes to fit 1200mm x 600mm grid openings. Custom sized tiles are used where the perimeter does not allow for full tiles.
Screenwood Systems are suitable for use with many lighting options including down lights, strip lighting and pendant lighting.
Flush mounting or recessing of lighting fixtures and incorporation of building services such as electrical and sprinklers can be accommodated by trimming panels on site.
Internal Solutions are available in Western Red Cedar, Hoop Pine, Hemlock and Spotted Gum. Other species may be available upon request. Screenwood is PEFC certified.
All panels are pre-finished prior to delivery and a wide range of finishes are available for internal and external applications.
All of our internal coatings (excluding Spotted Gum coatings) are low VOC. Solid paint colours are available on request.
Internal systems include the acoustic scrim fabric SC15 backing.
External Solutions are available in Western Red Cedar and Spotted Gum. Screenwood is PEFC ceritified.
All panels are pre-finished prior to delivery in one of our coloured oil finishes or a clear timber preservative.
These coatings have an oxidizing finish which slowly wears away. When re-finishing is required simply wash down with a light soloution of detergent and water to remove dust and dirt and recoat to desired finish.
We can guide you with compatibility where colour matching is required from internal to external ares.
All Screenwood timber products have been rated a group 3 building material in accordance with Specification C1.10 of the Building Code of Australia.
Screenwood Acoustic Systems are ideal for new and existing fitouts to maximise sound absorption. Designed for use in walls and ceilings where echo reduction is critical to the comfort and amenity of the room.
Screenwood Panels are designed as a modular system:
Screenwood External Panels are designed as a modular system:
Maintenance of Screenwood Panels varies according to the coating and the application.
Where the Screenwood Systems are used in an internal application and are pre-finished in internal grade coatings, periodic dusting should keep the panels looking their best. Should the panels require cleaning, we recommend wiping the panels down with a clean damp cloth. If the panels are subjected to any moisture, please wipe them down immediately. Internal coatings should not be wet down or hosed as this will negatively impact the coating. Oil coatings used in internal applications may be better cleaned with a soft brush and vacuum, taking care not to bruise the timber during this process.
Timber is a natural material and the lifespan of our external coatings will vary depending on the application, location and installation. Aspect of the façade can greatly influence the life as well as client expectations regarding the colour vibrancy of the coating. To allow timber to weather naturally to grey/silver colour, a clear timber preservative treatment is suggested.
Typically, oil finishes need to be reapplied every 12–24 months.
Timing will vary depending on site conditions, aspect and client expectation.All Screenwood products carry a limited 5 year warranty.